• Renogy 2 pack aluminum solar panel mounting Z brackets with stainless steel hardware for rigid panels
  • Solar panel mounting brackets and hardware kit for SolarFlares Generators solar installations
  • Sturdy silver solar panel mounting bracket with close-up details for SolarFlares Generators kits.
  • Solar panel mounting brackets for SolarFlares Generators, shown in four installation views.
1 8

Supports de montage de panneaux solaires en Z, lot de 2

Supports de montage de panneaux solaires en Z, lot de 2

$44.00 CAD
$55.00 CAD $44.00 CAD
Promotion Épuisé
Description Expédition

Renogy – 2 jeux de supports de montage en Z pour panneaux solaires – Solution de montage de panneaux solaires

Pour une installation sûre et sans tracas, les 2 jeux de supports de montage en Z pour panneaux solaires Renogy constituent une option fiable pour les projets d’énergie solaire hors réseau. Ce kit est conçu pour maintenir fermement des panneaux solaires rigides de 50 à 150 W. Il est parfait pour une installation sur des véhicules récréatifs, des remorques, des bateaux, des yachts, des murs, des toits, des abris de jardin et d’autres surfaces irrégulières.

Ces supports de montage sont fabriqués en aluminium résistant à la corrosion, ce qui garantit leur durabilité aussi bien dans les environnements terrestres que marins. Chaque ensemble est équipé de boulons, rondelles, écrous et vis autoperceuses en acier inoxydable pré-assemblés. Ce matériel simplifie l’installation en minimisant le besoin d’outils supplémentaires ou de main-d’œuvre. Un seul ensemble supporte des panneaux rigides d’une puissance maximale de 100 W. Les deux ensembles combinés peuvent accueillir des panneaux de 150 à 200 W, ce qui permet diverses configurations solaires.

Ultra-léger et facile à manipuler, un seul ensemble ne pèse que 0,29 kg (0,65 lb) et se plie à plat pour le voyage ou le stockage. Chaque support mesure 8,4 x 25,1 x 25,1 cm. Cela offre une solution compacte pour les projets de panneaux solaires de toute taille. La conception simple signifie que vous pouvez monter votre équipement d’énergie solaire rapidement. C’est utile même dans les endroits difficiles d’accès, comme les toits inégaux ou le pont d’un yacht.

Ce système de supports en Z offre un soutien solide à votre panneau sans avoir besoin de grands trous. Il présente une résistance fiable au vent, de sorte que votre installation solaire reste stable par mauvais temps. Vos panneaux continueront de répondre à vos besoins énergétiques au fil du temps. Les composants sont conçus pour résister à la rouille et à la corrosion, ce qui rend ce kit adapté aux conditions extérieures difficiles de nombreux projets solaires.

Idéal pour une utilisation hors réseau, ce kit polyvalent peut répondre à vos besoins en énergie solaire dans une cabine, lors d’une aventure en camping-car ou pour l’électronique d’un bateau. Le matériel inclus permet une installation simple et rapide pour une configuration solaire fiable. Bénéficiant d’une garantie d’un an, ces supports offrent une tranquillité d’esprit à quiconque recherche des solutions solaires à long terme et une alimentation portable efficace pour chaque voyage.

Les commandes sont traitées dans un délai de 1 à 3 jours ouvrables. La livraison prend généralement 7 à 14 jours ouvrables pour les commandes nationales et 10 à 20 jours pour les expéditions internationales. Les informations de suivi vous seront communiquées une fois votre commande expédiée.

Afficher tous les détails

Frequently Asked Questions

The 2 Pack Solar Panel Mounting Z Bracket is designed for rigid solar panels in the 50W to 150W range. One set supports a single rigid panel up to 100W, while both sets together can be used for panel setups in the 150W to 200W range, depending on the configuration. The brackets are built specifically for rigid panels, not flexible panels, and they include pre-assembled stainless steel bolts, washers, nuts, and self-drilling screws for mounting. This makes them a practical fit for RV owners, boaters, van users, and off-grid DIY installers who need a compact bracket for solar panels without sourcing extra hardware. If you are mounting larger or unusually heavy panels, it is smart to verify the panel frame dimensions and mounting points before installation.
Yes, these brackets are made for a wide range of mounting surfaces, including RVs, trailers, boats, yachts, walls, roofs, and sheds. The aluminum construction resists corrosion, which is important for outdoor exposure and especially useful in marine environments where moisture and salt can damage standard hardware. Each set is lightweight at just 0.65 lbs, so the brackets add minimal load to mobile or small off-grid setups. Their Z-bracket design also works well on irregular or uneven surfaces where a simple, secure panel mount is needed. This setup is ideal for travelers, cabin owners, and anyone building a small off-grid power system with rigid panels. The main limitation is that installation surface strength still matters, so the brackets should be attached to a solid structure rather than thin or weak material.
Yes, the 2 Pack Solar Panel Mounting Z Bracket is built for long-term outdoor use. The brackets are made from corrosion-resistant aluminum, and the included mounting hardware uses stainless steel bolts, washers, and nuts, which helps prevent rust in wet, humid, or coastal conditions. The design provides strong panel support with reliable wind resistance, while avoiding the need for large mounting holes. Each bracket measures 3.3 x 9.9 x 9.9 inches, giving a compact but sturdy mounting footprint for smaller rigid solar panel systems. This makes the kit a strong choice for RV users, marine installations, sheds, and rooftop off-grid setups that stay exposed to weather over time. For the longest service life, it is still worth checking fastener tightness periodically, especially after heavy wind, road vibration, or rough water travel.

Frequently Asked Questions

The 2 Pack Solar Panel Mounting Z Bracket is designed for rigid solar panels in the 50W to 150W range. One set supports a single rigid panel up to 100W, while both sets together can be used for panel setups in the 150W to 200W range, depending on the configuration. The brackets are built specifically for rigid panels, not flexible panels, and they include pre-assembled stainless steel bolts, washers, nuts, and self-drilling screws for mounting. This makes them a practical fit for RV owners, boaters, van users, and off-grid DIY installers who need a compact bracket for solar panels without sourcing extra hardware. If you are mounting larger or unusually heavy panels, it is smart to verify the panel frame dimensions and mounting points before installation.
Yes, these brackets are made for a wide range of mounting surfaces, including RVs, trailers, boats, yachts, walls, roofs, and sheds. The aluminum construction resists corrosion, which is important for outdoor exposure and especially useful in marine environments where moisture and salt can damage standard hardware. Each set is lightweight at just 0.65 lbs, so the brackets add minimal load to mobile or small off-grid setups. Their Z-bracket design also works well on irregular or uneven surfaces where a simple, secure panel mount is needed. This setup is ideal for travelers, cabin owners, and anyone building a small off-grid power system with rigid panels. The main limitation is that installation surface strength still matters, so the brackets should be attached to a solid structure rather than thin or weak material.
Yes, the 2 Pack Solar Panel Mounting Z Bracket is built for long-term outdoor use. The brackets are made from corrosion-resistant aluminum, and the included mounting hardware uses stainless steel bolts, washers, and nuts, which helps prevent rust in wet, humid, or coastal conditions. The design provides strong panel support with reliable wind resistance, while avoiding the need for large mounting holes. Each bracket measures 3.3 x 9.9 x 9.9 inches, giving a compact but sturdy mounting footprint for smaller rigid solar panel systems. This makes the kit a strong choice for RV users, marine installations, sheds, and rooftop off-grid setups that stay exposed to weather over time. For the longest service life, it is still worth checking fastener tightness periodically, especially after heavy wind, road vibration, or rough water travel.